MiniHPC Manual

- English
- Slovak

Introduction Installation

Hydraulic connection Electric connection Initial setup

1.1 Turn on/off heating by 1.2 Control temperature by 1.3 Equithermal regulation 1.4 Timer 1.5 Electric heater R2 1.6 Circulation pump R3

2.1 Turn on/off cooling by 2.2 Control temperature by 2.3 Timer 2.4 Circulation pump R3 2.5 3-way valve R5 2.6 Dew point / BT sensor

3.1 DHW temperatures 3.2 Timer 3.3 Anti-legionella 3.4 DHW HP conditions 3.5 Circulation pump R3 3.6 El. heater mode

4.1 Outdoor unit 4.2 Indoor unit 4.3 Equithermal curve

Service Statistics

6.1 Energy monitor 6.2 Heating overall stats 6.3 Cooling overall stats 6.4 DHW overall stats

7.1/7.2 NTC calibration 7.3 Flow sensor I1 7.4 input power 7.5 IDU heat temperature 7.6 IDU cool temperature 7.7 IDU DHW temperature

8.1 Flow protection 8.2 Frost protection 8.3 Anti blocking 8.4 Overload protection 8.5 ODU heating cable

9.1 WiFi station 9.2 WiFi AP 9.3 WEB ID 9.4 Permissions

Screen Logs Date / time Outdoor unit

13.1 Manual defrost 13.2 Power limit 13.3 Night mode

14.1 Firmware upgrade 14.2 Restore defaults

On-line cloud MQTT REST API Home Assistant Bluetooth

Supported air conditioners Technical data

DHW Menu / 3.5 - Circulation Pump R3

Menu 3.5 — Menu 3.5 - Circulation Pump R3

Turn-off Delay

of the circulation pump after DHW heating is switched off.

3.4 DHW HP conditions

3.6 El. heater mode

Copyright © MiniHPC.com 2024